The Inspection Samples tab allows inspectors to create and review the sampling locations and results associated with an inspection.
Samples and results are created automatically when the inspection is created for a permitted facility with discharge monitoring report (DMR) requirements. They can also be added manually for a permitted inspection without DMR requirements.
Create Samples and Sample Results Automatically
Upon creating an inspection for a permitted facility with DMR requirements, the Samples tab will display Sampling locations for each permitted feature and monitoring point associated with the permit.
Results rows will be generated for each parameter associated with each permitted feature and monitoring point. Additional samples and sample results can be added as needed.
Create Samples and Sample Results Manually
Samples may also be added manually. To add a new sample:
From the Samples List, click Add Sample.
Fill in sample information. The Sample Number is auto-generated. You must specify the Feature Identifier and Monitoring Location.
Click Save. The Sample record will be created and sample results may now be added.
Add Sample Results
To add a result to the sampling location.
From the Sample Detail page, click Add Result
Fill in the result details and click Save.
The result record will be creation and displayed on the Sample Detail page.
Sample results added directly to the inspection will not have Limit Qualifier, Limit, or Limit Unit values.